this control I have had more and like me very well.
deze regelaar heb ik al meer gehad en deze bevalt mij zeer goed.
you can buy this SWANGHOBBY 30A Programmable Electric Brushless Speed Controller at Remote Control Model Free Shipping Shop
Specification
Product Feature
Programming Instruction:
1. Connect your motor and receiver to the speed controller, but do not connect the battery yet.
2. Turn on your transmitter and full up the throttle stick. Please note: Most Futaba transmitters have the throttle channel reversed by default.
3. Connect your battery and you will hear a starting beep tone. After 3 seconds, the controller will start beeping a sequence as following. All beeps only repeat once.
4. To Select, move the throttle stick in off position, between Beeps repeat. Then you will hear a confirmation sound.
5. Each time when you select an option, it will exit programming menu. You may restart program again.
Options Table (for Aircraft version Normal Mode)
Beeping | Options | Note | |
1 | __,__ | Cell Type: LIPO | ESC identify the number of LIPO and set LIPO protection automatically. Cut-Off voltage at 2.9v per lipo. (option two will be disable automatically) |
2 | __ __, __ __ | Cell Type: NiMH | Select NiMH protection mode, Cut-Off voltage at 60% of starting voltage. (option one will be disable automatically) |
3 | __ __ __, __ __ __ | Break, Enable / Disable | Break enabled by Default |
Beeping | Options | Note | |
1 | __,__ | Cell Type: LIPO | ESC identify the number of LIPO and set LIPO protection automatically. Cut-Off voltage at 2.9v per lipo. (option two will be disable automatically) |
2 | __ __, __ __ | Cell Type: NiMH | Select NiMH protection mode, Cut-Off voltage at 60% of starting voltage. (option one will be disable automatically) |
3 | __ __ __, __ __ __ | Break, Enable / Disable | Break enabled by Default |
Input Voltage: 2-3 Lipo, 5-10 NiMH
Continuous AMP: 30A
MAX AMP: 45A/12S
BEC: 3A
Weight: 45 grams
No comments:
Post a Comment