Review on HOBBYWING Pentium 40A Electric Speed Controller

Swanghobby.com reviews on HOBBYWING Pentium 40A Electric Speed Controller.






Die Hobbywing Regler sind ja gemeinhin bekannt und ber?hmt f?r ihr ausgesprochen herausragendes Preis- Leistungverh?ltnis. Wie man auf dem Foto sehen kann, kommt er ordentlich eingepackt in einer Antistatik Verpackung mit Anleitung. Allerdings sollte man sich nach M?glichkeit gleich noch die Programmierkarte dazu kaufen. Ist halt einfach komfortabler. Ansonsten Top Produkt f?r den Preis und die Liederung war auch super schnell. Empfehlenswert.
you can buy this HOBBYWING Pentium 40A Electric Speed Controller at Remote Control Model Free Shipping Shop



Specification
Specification

- Output: Continuous 40A, Burst 60A up to 10 seconds.

- Input Voltage: 2-6 cells lithium battery or 5-18 cells NiCd/NIMh battery.

- BEC: 3A / 5V (Switch mode).

- Max Speed: 210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM (BLM: Brushless Motor)

- Product Size: 55 x 28 x 12mm

- Product Weight: 35g

Review on HOBBYWING eZRun 80A-SD Electric Brushless Speed Controller (1/8)

Swanghobby.com reviews on HOBBYWING eZRun 80A-SD Electric Brushless Speed Controller (1/8).






This ESC is a very nice product. High quality, powerfull, and durable. The acceleration is amacing, but the braking power is not as powerfull as i am used too. I ordered 2 of these, and boths orders were shipped after a week, and I recieved both after another week. Swang hobby is selling this ESC to the absolutly lowest price on the web, and the shipping is included. Thank you SWANG HOBBY.


you can buy this HOBBYWING eZRun 80A-SD Electric Brushless Speed Controller (1/8) at Remote Control Model Free Shipping Shop



Specification

Feature

-

Compatible with all sensorless brushless motors and most of sensored brushless motors such as Novak,



LRP and Feigao, etc

-

Excellent start-up, acceleration and linearity features




-

3 running modes (Forward only with brake, Forward/Reverse with brake, Forward/Reverse immediately)




-

4 steps of maximum reverse force adjustment

-

Proportional ABS brake function with 4 steps of maximum brake force adjustment, 8 steps of drag-brake force adjustment and 4 steps of initial brake force adjustment

-

9 start modes (Also called “Punch”) from “very soft (Level 1)” to “very aggressive (Level 9)

”

-

Multiple protection features: Low voltage cut-off protection / Over-heat protection / Throttle signal loss protection / Motor blocked protection

-

8 steps of timing adjustment by software

-

Built-in switch mode BEC has a powerful output to supply all the electronic equipments




-

Easily program with only one button and compatible with pocket-sized Program Card.




-

Firmware can be updated through an USB adapter (Optional equipment).




-

Splash proof and dustproof

Specification

- Continuous Current:

80A

- Burst Current:

270A

- Suitable Motor:

Sensorless and sensored brushless motors

,

8T and > 8T

- Suitable Scale:

1/8 on-road or off-road cars / trucks for sportful race and RTR application

- Input Voltage:

6-12 cells NiMH/NiCd or 2-4 cells Li

-

Po

lymer Battery

- BEC Output:

5.75V/3A (Switch mode built-in BEC)

-

Resistance: 0.0018Ohm

- Dimensions:

68

x

55

x

45mm

- Net Weight:

150g



(Without wires)

Review on G.T. Power 3 Servos / ESC Consistency Master

Swanghobby.com reviews on G.T. Power 3 Servos / ESC Consistency Master.






Great Tool to check and compare servo performance. I find it very usefull to set neutral position at servo instalation process.




you can buy this G.T. Power 3 Servos / ESC Consistency Master at Remote Control Model Free Shipping Shop



Specification

In three modes to check Servos or ESC:

1.



Manual mode – Turn the knob will different speed. Check the reaction time.

2.



Neutral mode – Make the servo go back to the neutral point.

3.



Automatic “window wiper” mode-make the servo swing like window wipers in the biggest angle.

It can connect 1 – 3 servos simultaneously and test such as 1- 3 servos consistency and so on.

It can also connect 1 – 3 ESC to test and compare their reaction time respectively.

It can connect 3 servos of the CCPM helicopters and select servos.

It can also connect the servo of airplanes install the steering-box and adjust planes by using such as the neutral mode and so on.

Review on HOBBYWING eZRun 13T/3650-M 3000Kv Sensorless Brushless Motor + 35A-SL ESC + LED Card

Swanghobby.com reviews on HOBBYWING eZRun 13T/3650-M 3000Kv Sensorless
Brushless Motor + 35A-SL ESC + LED Card.






Hello every,



I bought this combo set 14 days ago. I build it in the Tamiya TT01 D-spec. My english is not terribly well, because i coming from the netherland. This combo set is very good! I can drive now very hard and the motor is very very VERY silence! The is pretty good, and the ESC too. Its perfect for the tamiya factory and other! Drives VERY hard and it is Topquality.


you can buy this HOBBYWING eZRun 13T/3650-M 3000Kv Sensorless
Brushless Motor + 35A-SL ESC + LED Card at Remote Control Model Free Shipping Shop



Specification


Features








1.



Specially designed for RC car, with excellent start-up, acceleration and linearity features.






2.



Compatible with sensorless brushless motor.






3.



Use top quality electronic components to enhance the current endurance ability of the ESC.






4.



2 running modes (Racing mode and Forward/Backward mode)






5.



4 steps of maximum reverse force adjustment.






6.



Proportional ABS brake function with 4 steps of maximum brake force adjustment,

8 steps of drag-brake force adjustment and 4 steps of initial brake force adjustment.






7.



4 start modes (Also called “Punch”) from “soft” to “very aggressive”.






8.



Multiple protection features: Low voltage cut-off protection for lithium or nickel battery / Over-heat protection / Throttle signal loss protection / Motor blocked protection.








9.



8 steps of timing adjustment.






10.



Waterproof and dustproof.






11.



Easily program with only one button and compatible with pocket-sized program card.

Specification




Cont. Current: 35A


Burst Current: 190A


Resistance: 0.0015 ohm


Suitable Car: >13T


Kv: 3000T


Battery: 4-9 Cell Ni-xx (NiMh or NiCd) or 2-3 Cell Li-Po


BEC Output: 6V / 1.5A


Motor Type: Sensorless Brushless Motor


Dimension: 31.5mm x 27.5mm x 24mm (The height of fan is not included)


Weight: 30g (without wires)

Review on SWANGHOBBY 30A Programmable Electric Brushless Speed Controller

Swanghobby.com reviews on SWANGHOBBY 30A Programmable Electric Brushless Speed Controller.






this control I have had more and like me very well.

deze regelaar heb ik al meer gehad en deze bevalt mij zeer goed.
you can buy this SWANGHOBBY 30A Programmable Electric Brushless Speed Controller at Remote Control Model Free Shipping Shop



Specification




Product Feature

Programming Instruction:


1. Connect your motor and receiver to the speed controller, but do not connect the battery yet.


2. Turn on your transmitter and full up the throttle stick. Please note: Most Futaba transmitters have the throttle channel reversed by default.


3. Connect your battery and you will hear a starting beep tone. After 3 seconds, the controller will start beeping a sequence as following. All beeps only repeat once.


4. To Select, move the throttle stick in off position, between Beeps repeat. Then you will hear a confirmation sound.


5. Each time when you select an option, it will exit programming menu. You may restart program again.





Options Table (for Aircraft version Normal Mode)

	Beeping	Options	Note
1	__,__	Cell Type: LIPO	ESC identify the number of LIPO and set LIPO protection automatically. Cut-Off voltage at 2.9v per lipo. (option two will be disable automatically)
2	__ __, __ __	Cell Type: NiMH	Select NiMH protection mode, Cut-Off voltage at 60% of starting voltage. (option one will be disable automatically)
3	__ __ __, __ __ __	Break, Enable / Disable	Break enabled by Default

	Beeping	Options	Note
1	__,__	Cell Type: LIPO	ESC identify the number of LIPO and set LIPO protection automatically. Cut-Off voltage at 2.9v per lipo. (option two will be disable automatically)
2	__ __, __ __	Cell Type: NiMH	Select NiMH protection mode, Cut-Off voltage at 60% of starting voltage. (option one will be disable automatically)
3	__ __ __, __ __ __	Break, Enable / Disable	Break enabled by Default

Input Voltage: 2-3 Lipo, 5-10 NiMH


Continuous AMP: 30A


MAX AMP: 45A/12S


BEC: 3A


Weight: 45 grams

OS Engine Review

I have brought some OS engine from swanghobby.com and seems it is very good and low shipping cost from Hong Kong.
OS Engines

First to introduce a mass-produced 4-stroke engine, an innovator in every phase of R/C engine production, O.S. also retains a tradition of craftsmanship that pays off in durability and power. Each new engine is the product of over two years of testing and design—and more than two generations of R/C engine experience.

I have brought a 91Hz from swanghobby.com

With back-to-back FAI world championships in 2005 and 2007, the 91SZ-H was a winner by anyone's standards. Now there's the 91HZ – a 91SZ-H redesigned with the help and advice of the world's top pilots. It offers the tuning ease and performance consistency of the multi-time world champion and design innovations that promote improved cooling, a tighter compression seal – and tuning ease!
The narrow profile of the heat sink head helps the 91HZ fit completely inside cooling shrouds without cutting or losing cooling power!
Two heat sinks – one on the head, another on the crankcase – allow airflow to carry away heat and maintain performance.
Better overall balance reduces engine noise and promotes smoother, stronger performance.
The new 61B carb takes consistency to the next level. Dependability features start with an insulating ring which prevents crankcase heat from affecting carb settings. A generous use of O-ring seals – two on the main needle, one on the rotor – prevents air leaks and power fluctuations.
In-flight control of the needle valve ensures smooth, consistent runs.

http://www.swanghobby.com/osengine-fs-91sii-4-stroke-engine-pr-1618.html

O.S.ENGINE MAX-50SX-H Ring Hyper 2 Stroke Engine very good.

new blog about rc toys

new blog about rc toys
http://rclover.blog.com/

Review on Flyermate 1000W 650Kv 70A A3720 Brushless Motor

Swanghobby.com reviews on Flyermate 1000W 650Kv 70A A3720 Brushless Motor.






his is a very versatile motor, I have had great success with power and the performance and how this unit stands up tp rough tratment. I have had several "nose ins" with the motor burried past the firewall and with only a blowing out of dirt and debris, managed to get going again! (in another plane of course!) Check out my video on youtube:

http://www.youtube.com/watch?v=VTunTBEoKQ4

You'll giggle like a girl.........




you can buy this Flyermate 1000W 650Kv 70A A3720 Brushless Motor at Remote Control Model Free Shipping Shop



Specification
Specification

- Weight: 150grams

- Speed constant: 650KV

- Shaft diameter: 7.0mm

- Max. efficiency current: 70A

- Working voltage: 6~23V

- Power: 1000 W/60s

Review on SWANGHOBBY 14.8v 4000mAh Li-Polymer Battery

Swanghobby.com reviews on SWANGHOBBY 14.8v 4000mAh Li-Polymer Battery.






Great deal for a good capacity, good voltage battery pack. All four cells were within .02V of one another upon receipt. As picture shows, battery comes with Deans already soldered on, which I think is a nice touch as that is what I would have put on myself. Total weight 11.95oz, (339g).

Shipping to my mailbox in Texas, took just over a week.

I'll look forward to purchasing more items from Swang Hobby.




you can buy this SWANGHOBBY 14.8v 4000mAh Li-Polymer Battery at Remote Control Model Free Shipping Shop



Specification
Specification

- Voltage: 14.8v.

- Mah: 4000

- Size: 145mm x 47mm x 31mm

- Weight: 370g

Review on Flyermate Broad AMP Cell 11.1v 4500mAh 20C Li-Polymer Battery

Swanghobby.com reviews on Flyermate Broad AMP Cell 11.1v 4500mAh 20C Li-Polymer Battery.






Excellent. My car is faster than ever. it was fitted in a blitzer beetle, it's flying




you can buy this Flyermate Broad AMP Cell 11.1v 4500mAh 20C Li-Polymer Battery at Remote Control Model Free Shipping Shop



Specification
Flyermate 11.1v 4500mAh 20C Broad AMP Cell Li-Polymer Battery

with battery data sheet. Flyermate Broad AMP Cell Lipolymer Battery assemblies with SWANG high quality lipo cell. This allows higher output of AMP than traditional lipo cell.



Specification

- Discharge Rate: 20C

- Burst Rate: 25C

- Voltage: 11.1v

- Mah: 4500

- Size: ~130mm x ~45mm x ~32mm

- Net Weight: ~295grams

Review on HOBBYWING eZRun 9T/3650-M 4300Kv Sensorless Brushless Motor + 35A-SL ESC + LED Card

Swanghobby.com reviews on HOBBYWING eZRun 9T/3650-M 4300Kv Sensorless
Brushless Motor + 35A-SL ESC + LED Card.






very fast shipping Pretty much as title really, put the 9t Ezrun Brushless in Mad truck I am suitably impressed considering how cheap these things are.




you can buy this HOBBYWING eZRun 9T/3650-M 4300Kv Sensorless
Brushless Motor + 35A-SL ESC + LED Card at Remote Control Model Free Shipping Shop



Specification
Features

1. Specially designed for RC car, with excellent start-up, acceleration and linearity features.

2. Compatible with sensorless brushless motor.

3. Use top quality electronic components to enhance the current endurance ability of the ESC.

4. 2 running modes (Racing mode and Forward/Backward mode)

5. 4 steps of maximum reverse force adjustment.

6. Proportional ABS brake function with 4 steps of maximum brake force adjustment, 8 steps of drag-brake force adjustment and 4 steps of initial brake force adjustment.

7. 4 start modes (Also called ¡§Punch¡¨) from ¡§soft¡¨ to ¡§very aggressive¡¨.

8. Multiple protection features: Low voltage cut-off protection for lithium or nickel battery / Over-heat protection / Throttle signal loss protection / Motor blocked protection.

9. 8 steps of timing adjustment.

10. Waterproof and dustproof.

11. Easily program with only one button and compatible with pocket-sized program card.



Specification

Cont. Current: 35A

Burst Current: 190A

Resistance: 0.0015 ohm

Suitable Car: >9T

Battery: 4-9 Cell Ni-xx (NiMh or NiCd) or 2-3 Cell Li-Po

BEC Output: 6V / 1.5A

Motor Type: Sensorless Brushless Motor

Dimension: 31.5mm x 27.5mm x 24mm (The height of fan is not included)

Weight: 30g (without wires)

Review on Chewing Gum Style Mini Camera

Swanghobby.com reviews on Chewing Gum Style Mini Camera.






I have the hi res version of this cam and it's not to bad not the greatest picture quality but quite suitable for shooting from your model. If you need a long record time you can power it throu the USB connector but not while conected to your computer. If you press the front button down it turnes into a WEBCAM but there are no drivers availble anywhere I could find. To make it easier to mount you can remove the clip from the back. Take off the 4 screws on the clip side and the clip is held on by 2 screws inside. note the cute tiny camera!




you can buy this Chewing Gum Style Mini Camera at Remote Control Model Free Shipping Shop



Specification

This Spy Camera can be installed in Remote Controlled Airplane, Helicopter, Vehicle and boat. Also can be used for your Spy mission!

Specification

- Video: 352 x 288 CIF resolution

- Video Format: AVI

- Support System: Window 98/ME/2003/Vista/OS/Linux

- Working Time: record for 4 hours.


- 4 GB Internal Memory

- Battery: Built-in Lithium-Polymer Battery

- Charging Voltage: DC-5C (Charge by using a USB cable included)

- Weight: 17grams only

Review on Hobbywing Seaking-60A Brushless Electric Speed Controller

Swanghobby.com reviews on Hobbywing Seaking-60A Brushless Electric Speed Controller.






Great speed controler.
you can buy this Hobbywing Seaking-60A Brushless Electric Speed Controller at Remote Control Model Free Shipping Shop



Specification

Feature

-

Use top quality electronic components to enhance the current endurance ability of the ESC.

-

Special designed for RC boat, with excellent start-up, acceleration and linearity features.

-

With water cooling system and the whole ESC is waterproof to get a longer life.

-

With 2 running modes ("Forward" mode and "Forward/Backward" mode).

-

Multiple protection features: Low voltage cut-off protection for lithium or nickel battery / Over-heat protection / Throttle signal loss protection.

-

With 8 steps of timing adjustment, compatible with all kinds of sensorless brushless motors.

-

Switching mode built-in BEC has a very powerful output even working with 6 cells

L

i

-P

o battery.

-

User programmable and compatible with the pocket-sized Digital LED Program Card (Optional equipment) to set the ESC easily.

Specification

- Continuous Current: 60A

- Burst Current: 120A

- Input Voltage: 6 – 18 cells NiMH/NiCd or 2 – 6 cells Li-Po

- BEC Output: 6V@3A Switching mode built-in BEC

- Dimensions: 94 x 33 x 18mm

- Net Weight: 76g

Copterx Helicopter Spare Parts

Question: Does CopterX Helicopter spare parts compatible to Align 450 spare parts?
In short, my personal experience has been excellent. Plug and play and the quality is just as good as the align unit.

I fly CopterX V2 tails on both my helis and they rock.when and if I ever trash my heads they will be replaced with Copterx as well.

i also have the copter x head and tail assembly on my trex 450 it rocks. so smooth. it came with ball link arms that go to the servo arm. i popped them off (lazy) stuck in the copter x and checked the screws for tight (all were very tight) and flew. very smooth.night and day to my sa head. i was worried as well if i shouldn't have spent money not knowing if quality was the same. but i'm impressed. i've got a new se coming with metal head and i'll compare and let you know if parts will swap around. should be here in a day or so.

I have brought the copterx spare parts at swanghobby.com , they are in Hong Kong and fairly cheap, most important, free shipping :)
http://www.swanghobby.com/copterx-450-v2-spare-parts-c-235.html
and i also got my CopterX 450 here.
http://www.swanghobby.com/helicopter-kit-c-215.html

Is CopterX 450 same as Align 450 Helicopter?

Many remote control toy fans email me about the copterx helicopter, especially for the copterx 450SE version, is it good? is it compatiable with Align 450SE?

I have started an investigation between CopterX 450 and Align 450 SE,

Where can I buy the Copterx Spare Parts?Go to Swanghobby.com , it is the free shipping site i ever found on the internet, but it is shipped from Hong Kong, China.See the linkhttp://www.swanghobby.com/copterx-450-v2-spare-parts-c-235.html

Also, for the CopterX Helicopter and other related CopterX Productgo there: http://www.swanghobby.com/copterx-m-14.html

CopterX is fully compatible with Align 450 parts. All the parts on the Copter X is compatible with the SE the Copter 450AE is no different from the 450SE and is compatible with the TREX450SE and SA. From the boom parts head, tail, belt. All parts are the same. Aluminum of CopterX 450AE is okay. But the material is too soft. For the carbon frame of CopterX 450SE is much better. If you want to land quickly, it will stand the hard landing.

Our Answer is CopterX Helicopter and Trex Align is 100% same...

It is because Trex Align is produced in China now, and the factory may sell the toolings (the frame, machine) to other reseller, therefore, you guy can enjoy a cheaper version of Align Trex.

"The V2 CopterX head is very nice, no slop as delivered and operates smoothly. I believe the ball links are steel, but I don't have any testing equipment. The swashplate bearing is not so good and develops slop quickly, but Align has the same problem; I switched to a Beam swashplate."

Finally, let's check the specification of CopterX SE 450

http://www.swanghobby.com/copterx-cx450se-v2-helicopter-kit-pr-964.html

Feature of CopterX SE 450 Helicopter
- New CNC carbon frame improve the rigidity and perfect for 3D flying.
- Changing servo location to CCPM version, new aluminum parts for prompt, precision actions.
- SSG battery mounting plate connects to main frame. It makes the center of gravity closed to rotor blade, reduced the correction when the helicopter rotation rolling.
- Rigid CNC aluminum rotor head for precision and smooth movements.
- Using Ball and Hiller two systems mixing control. Through simple structure of Ball control system, power-saving of Hiller system and CCPM control, can simultaneously control 3 servos for AILE, EVLE, PIT 3 actions. This CCPM control system is great for 3D flying control and extending life cycle of servos.
- New streamlined tail rotor blades make the gyro more efficient.
- New tail rotor control set, CNC control piece and movable ball link for smooth pitch travel.
- Providing fly bar weight- When normal flying, you can add the weights on fly bar paddles for stable flight. When aerobatic flying, you don't need to add the weight, but you can see the flexibility of 3D actions.
- CNC Metal tail unit and tail holder are using high rigid aluminum, falling resistance.
- New gear ratio (4.24:1), suitable for the motor with higher KV, provides more safety.
- Use Aluminum alloy drive pulley and tail drive pulley, high rigid and wear resistance. It is efficient to reduce the rotation loss and makes smoother.
- All kit use stainless steel linkage ball, wear resistance, anti-oxidization.
- Tail rotor hub made of stainless steel, very rigid.
- Great stable and sensitive mixing lever design! Can display the great stability and precision for 3D flight.
- CX 450AE special adjustable pitch system, hold rotation system, tail rotor drive belt system! It is a work of great originality for helicopter.
Specification
- Length: 650mm
- Height: 230mm
- Main Rotor: 700mm
- Tail Rotor: 150mm
- Motor Gear: 13T/11T
- Main Gear: 150T
- Autorotation Tail Drive Gear: 106T
- Tail Drive Gear: 25T
- Drive Gear Ratio: 1:11.5:4.24/1:13.6:4.24
- Weight(without power system): 354g
- Weight(including power system): 690g

Where to buy Copterx Helicopter

You can buy Copterx Helicopter from Swanghobby.com
http://www.swanghobby.com/copterx-m-14.html

CopterX CX450SE V2 Helicopter Kit
Feature
- New CNC carbon frame improve the rigidity and perfect for 3D flying.
- Changing servo location to CCPM version, new aluminum parts for prompt, precision actions.
- SSG battery mounting plate connects to main frame. It makes the center of gravity closed to rotor blade, reduced the correction when the helicopter rotation rolling.
- Rigid CNC aluminum rotor head for precision and smooth movements.
- Using Ball and Hiller two systems mixing control. Through simple structure of Ball control system, power-saving of Hiller system and CCPM control, can simultaneously control 3 servos for AILE, EVLE, PIT 3 actions. This CCPM control system is great for 3D flying control and extending life cycle of servos.
- New streamlined tail rotor blades make the gyro more efficient.
- New tail rotor control set, CNC control piece and movable ball link for smooth pitch travel.
- Providing fly bar weight- When normal flying, you can add the weights on fly bar paddles for stable flight. When aerobatic flying, you don't need to add the weight, but you can see the flexibility of 3D actions.
- CNC Metal tail unit and tail holder are using high rigid aluminum, falling resistance.
- New gear ratio (4.24:1), suitable for the motor with higher KV, provides more safety.
- Use Aluminum alloy drive pulley and tail drive pulley, high rigid and wear resistance. It is efficient to reduce the rotation loss and makes smoother.
- All kit use stainless steel linkage ball, wear resistance, anti-oxidization.
- Tail rotor hub made of stainless steel, very rigid.
- Great stable and sensitive mixing lever design! Can display the great stability and precision for 3D flight.
- CX 450AE special adjustable pitch system, hold rotation system, tail rotor drive belt system! It is a work of great originality for helicopter.

Specification
- Length: 650mm
- Height: 230mm
- Main Rotor: 700mm
- Tail Rotor: 150mm
- Motor Gear: 13T/11T
- Main Gear: 150T
- Autorotation Tail Drive Gear: 106T
- Tail Drive Gear: 25T
- Drive Gear Ratio: 1:11.5:4.24/1:13.6:4.24
- Weight(without power system): 354g
- Weight(including power system): 690g

Copterx Helicopter

Copterx Helicopter
Many person asking me about the different between Align Trex and CopterX Helicopter.
There are loads of these advertised on Ebay saying that all Trex 450SE parts will fit! Here is a link to one on Ebay

Copterx is 100% compatiable to Align Trex Parts, The fact that Trex SE parts will fit on the CopterX does NOT mean that the CopterX is the same as a Trex. It just means the parts have the same dimensions, but it doesn't mean they're of the same quality; i.e. same metals, same manufacturing tolerances, etc. compared to Align parts. I'm not saying the CopterX isn't as good either since I don't know; just pointing out that "parts compatible" doesn't mean it's the same heli

Copterx NOT Equaly to Align Trex.
all the parts are compatible but they manufacture differently. Quality is different too Align as always is said to have better quality parts and Copter X is a low grade copy. I guess its up to the users to decide and dependent on their budget.

But, is it worth to buy a CopterX Helicopter?
One flyer answered:
ok guys, i have flown many trex se's, and after purchasing my copterx a month ago and doing some serious 3d with it, go for the copterx. As far as the quality of the aluminum, its the SAME QUALITY. I know these helis, and this is built well. The only thing that i have found to be cheaper on the copter x as of now, is the se has ball bearings on both sides of the feathering shaft, were as the copterx has brass bushings. A cheap fix that is recomended. I have had a few other trex pilots fly my copterx and overall impression is excelent. If you want to save some coin, go for the copterx, but please, get the se version. You will be kicking yourself in the but latter if you don't. AS far as setup, just go to a club and find some one help you assemble. A pro could through this thing together in about an hour. You will need to learn some time, so why not now? Overall, great heli. Don't go with the rtf version, comes with cheap servo's/gyro. Get a good digital tail servo, some nice hitecs for your swash, and a 401 as your gyro. Especially if your new, a good gyro with help you in your training.

Where to buy Copterx Helicopter
www.swanghobby.com/CopterX-CX450SE-V2-Helicopter-Kit-p-964.html

Copterx Helicopter

New Blog Recommended

I would like to recommend you guy a new blog
http://rclovers.blogspot.com/
http://hobbyminded.com/rc-racing-car/brushless-motor-combo
thanks
Jason

losi mini T and hobbywing esc combo upgrade!!

The hobbywing esc HOBBYWING eZRun 18T/2030 5200Kv Sensorless Brushless Motor + 18A-SL ESC + LED Card can be an brushless upgrade for losi mini T racing car.

Hobbywing eZRun 18T series is for 1:18 mini Racing car.

Sponsor: www.swanghobby.com Remote Control Model

The specification of losi mini T racing car

1/18 Mini-T Stadium Truck RTR
The Losi Mini-T RTR is loaded with championship-quality features like extended travel, long-arm suspension, high-performance transmission and more.
At a Glance
The Losi Mini-T RTR is a full-featured, 1/18-scale off-road truck that you can race just about anywhere. Its chassis is inspired by the championship-winning XXX-T and boasts "big truck" features like an extended travel, long-arm suspension, digital proportional radio system with adjustable rate steering, as well as an electronic speed control with reverse. Best of all, the Mini-T is completely ready to run and includes a painted body with stickers already applied. Just drop four AA alkaline batteries into the truck and eight into the transmitter, and you're off.
Features
Completely ready-to-run with painted body
Potent RS-280 motor
Digital proportional radio system and electronic speed control included
Product Specifications
Length:8.6 in (218mm)
Width:7 in (178mm)
Wheelbase:5.6 in (142mm)
Chassis:Molded composite
Suspension:Independent front and rear A-arm
Drive Train:Gear-driven transmission with slipper clutch
Tire Type:Rubber ribbed tread w/ foam inserts (front), rubber mini-pin tread w/ foam inserts (rear)
Motor or Engine:RS-280 type
Radio:Pistol grip digital proportional with servo reverse and dual steering rate (27MHz)

Review on Flyermate M Series 11.1v 2200mAh 20C Li-Polymer Battery

Swanghobby.com reviews on Flyermate M Series 11.1v 2200mAh 20C Li-Polymer Battery.






Use in Typhoon , works great , cant beat the price. I own 5 batteries total from Swang and the flyermate seems to be my favorite.




you can buy this Flyermate M Series 11.1v 2200mAh 20C Li-Polymer Battery at Remote Control Model Free Shipping Shop



Specification

Specification

-

Voltage:

11.1v

- mAh: 2200mAh

- Discharge Rate: 20C

- Burst Rate: 25C

- Dimensions: 103 x 19 x 33mm

- Net Weight: 171g

Tower pro 1750Kv Outrunner Brushless Motor

Swanghobby.com reviews on Tower pro 1750Kv Outrunner Brushless Motor.






this Tower pro Outrunner Brushless Motor does a great job in my Delta airplane!

a lot of fun for reasonable price!




you can buy this Tower pro 1750Kv Outrunner Brushless Motor at Remote Control Model Free Shipping Shop



Specification
Specification

- Dimension: 30.6 x 65mm

- Speed Constant: 1750KV

- Working Voltage: 7.2-12.6V

- Shaft Extension: 31.2mm

- Shaft Diameter: 2.8mm

Review on SWANGHOBBY 11.1v 2200mAh 30C Li-Polymer Battery

Swanghobby.com reviews on SWANGHOBBY 11.1v 2200mAh 30C Li-Polymer Battery.






The battery swanghobby lipo 3s 2200 mah 30C is very good and I'm happy. I will buy more.

I like free shipping and attention of the whole team.

I recommend to all my friends in Brazil to make purchases in swanghobby.com.

Thanks




you can buy this SWANGHOBBY 11.1v 2200mAh 30C Li-Polymer Battery at Remote Control Model Free Shipping Shop



Specification
Specification

- Voltage: 11.1v.

- Mah: 2200

- Size: 11.5cm x 2.4cm x 3.5cm

- Discharge: 30C

- Burst Discharge: 60C

- Weight: 200g

Hobbywing Ezrun Combo Professfional Review

Hobbywing is a good brand of Remote controlled Toy, it is cheap, but very very power!

Author: chngee reviews the HOBBYWING eZRun 12T/2030 7800Kv Sensorless Brushless Motor + 18A-SL ESC + LED CardI'm using this same HW 18A EZRun ESC with brushless motor and i can say that it runs so much faster than brushed motors. Best for speed racing and less maintenance

Author: Derek Chng reviews the HOBBYWING eZRun 12T/2030 7800Kv Sensorless Brushless Motor + 25A-SL-L ESC + LED CardI've used this in my 1/18A 4WD buggy and it sure runs faster than brushed motor. It's so much better as little maintenance is needed and it's clean.

Author: bill reviews the HOBBYWING eZRun 3676SL 2350Kv Sensorless Brushless Motor + 150A-SD ESC + LED Cardpurchased 2 c-2 systems . i put them in e-max 3905 very much pleased with them. motor,ecs,batts. run cool swang hobby great to deal with will buy at swanghobby.com again. thank you


Hobbywing launched variety Electronic Speed Controllers for remote control model lovers, such as Hobbywing airplane , helicopter series, and currently, Hobbywing launched eZRUN series, and Xerun series.

How to select Hobbywing ESC Combo?
For 1:18 Racing Car lovers, you can buy

HOBBYWING eZRun 12T/2030 7800Kv Sensorless Brushless Motor + 18A-SL ESC + LED Card



HOBBYWING eZRun 12T/2030 7800Kv Sensorless Brushless Motor + 25A-SL-L ESC + LED Card


HOBBYWING eZRun 18T/2030 5200Kv Sensorless Brushless Motor + 18A-SL ESC + LED Card



For 1:10 Racing Car , you can buy

HOBBYWING eZRun 5.5T/3650 6000Kv Sensorless Brushless Motor + 60A-SL ESC + LED Card




HOBBYWING eZRun 8.5T/3650 4000Kv Sensorless Brushless Motor + 60A-SD ESC + LED Card




HOBBYWING eZRun 13T/3650-M 3000Kv Sensorless Brushless Motor + 35A-SL ESC + LED Card

Even more to have bigger Hobbywing combo set? Lets consider the C1 to C2 series with up 150A electronic speed controllers which is super power for Monster Class racing.
HOBBYWING eZRun 3676SL 2350Kv Sensorless Brushless Motor + 150A-SD ESC + LED Card

The hobbywing is compatible with all sensorless brushless motors and most of sensored brushless motors such as Novak, LRP and Feigao, etc. It has 3 running modes (Forward only with brake, Forward/Reverse with brake, Forward/Reverse immediately) and 4 steps of maximum reverse force adjustment. Mostly, the Built-in switch mode BEC has a powerful output to supply all the electronic equipments. Last but not least, it is Splash proof and dustproof.


and here is my note of the specification of 150A esc
Specification for the EZRUN 150A-SD ESC
1.1 Output: Continuous current 150A, burst current 1080A.1.2 Input: 6-18 cells NiMH/NiCd or 2-6 cells LiPo.
1.3 BEC Output: 5.75V/3A (Switch mode built-in BEC).
1.4 Resistance: 0.0002 Ohm.
1.5 Motor Supported: Sensorless and sensored brushless motors
1.6 Suitable Brushless Motor: 3.5T and > 3.5T
1.7 Suitable Car: 1/5, 1/8 on-road or off-road cars / trucks for competitive race.1.8 Size: 68mm(L) * 55mm(W) * 45mm(H).1.9 Weight: 150g(Without wires)


Always, a Hobbywing Combo is pair up with a Brushless Motor and a power esc, also with a program card. You can select variety of combination at http://www.swanghobby.com/ , the hobbywing dealer. Surely, you can buy the motor, esc or card individually to meet your need of racing

Enjoy!


Swanghobby

Review on KDS 2.4Ghz Transmitter Module (JR Transmitter)

Swanghobby.com reviews on KDS 2.4Ghz Transmitter Module (JR Transmitter).






i have one of these units in my walkera 8 channel pcm radio and it works flawlessly great buy for a reasonable price




you can buy this KDS 2.4Ghz Transmitter Module (JR Transmitter) at Remote Control Model Free Shipping Shop



Specification

KDS 8XTJ 2.4GHz radio system units are advanced electronic device, which are compatible with various types in R/C world by selecting different modes. It can support multi-users and multi-equipment at one time. It features quick response, high precision, and strong capability for anti-jamming.

R F Module for JR transmitter

JR is trademark or registered trademark of their respective owners.

KDS-8XTJ can be compatible with JR9X radio

Dimension: 60mmx44mmx22mm

Frequency: 2.4GHz

Automatic screening

Multiple people can use it at the same time, and it won’t cause interference

Program setting not needed thus no need to worry about mal-operation.

It can well support gyros of different brands.

Review on Flyermate L Series 22.2v 5000mAh 20C Li-Polymer Battery

Swanghobby.com reviews on Flyermate L Series 22.2v 5000mAh 20C Li-Polymer Battery.






Very good product. Great performance. Very nice price. Makes flying with helis a real pleasure.




you can buy this Flyermate L Series 22.2v 5000mAh 20C Li-Polymer Battery at Remote Control Model Free Shipping Shop



Specification
Specification

- Voltage: 22.2v

- mAh: 5000

- Discharge Rate: 20C

- Burst Rate: 25C

- Dimensions: 147 x 44 x 60mm

- Net Weight: 861g