LEOPARD

LEOPARD Brushless Motor for Airplane
16 products 
LEOPARD Brushless Motor for Helicopter
4 products 
LEOPARD Ducted Fan System
6 products 
LEOPARD Sensored Brushless Motor
3 products 
LEOPARD 2 Poles Brushless Motor for Car and Boat
20 products 
LEOPARD 4 Poles Brushless Motor for Car and Boat
49 products
LEOPARD Brushless Motor Water-Cool Kit
8 products

LEOPARD  POWER  MODEL has 15 years experience in manufacturing with precision hardware. Recently LEOPARD POWER MODEL has been developing and producing OBM Brushless Motors and Brushless Governor ESCs.  

 

LEOPARD POWER MODEL keeps a pace with the latest technologies and strives to push the boundaries in developing new products.

 

I've been playing around with my new Leopard 60A 3300KV brushless system from HobbyHot.com for a couple days now. Looks like I was the early adopter on this one, so I figured I'd write a little review. 



Setup of this system is essentially plug-and-play; the ESC automatically sets up neutral and endpoint settings when you turn it on. Listen for a series of videogame beeps, then a pause, then a different set of beeps, and it's good to go. You do have to be a little creative in finding a spot for the ESC, because the wires for the motor and battery aren't very long. It's also a good idea to wrap electrical tape around the motor connectors after you plug them in, so they don't come unplugged while you're running. (This happened to me twice during my initial test run.)

This is my first brushless system, and I had no idea what to expect in terms of power. I'm quite pleased. It's about on a par with a hot modified brushed motor, but the power curve is different; it runs more like a nitro engine, actually. Instead of running out of steam at higher speeds like a brushed motor does, it keeps pulling strong until the RPMs top out. I did notice a little stutter at low speeds (what I assume is the phenomenon known as "cogging") but only for a second or two; once it got rolling, the throttle response was very smooth and responsive. Right now I have the startup power in the "standard" setting, which starts it out nice and easy and then ramps up after a second or so. This is good for saving gears, I suppose, but the lag is a little annoying. I think I'll try switching it to "high," just to see if it's more responsive. I also need to bump up the reverse power, because right now, it barely moves in reverse.

This ESC uses the "double-click" setup for reverse, like the Tamiya ESCs: First push backwards is all brake until you let off, and then the second push is reverse. I really like this setup better than a delay or a 50:50 setup. You can also turn reverse off. The brakes are weaker than I had hoped, but they do stop the car in a reasonable distance. There are settings for drag brake too, but I haven't played with them yet.

Programming is easy: plug the ESC into the card, turn it on, select the setings you want (via red LEDs), push "Enter," and it beeps. Turn it off, plug it back into the receiver, and you're all set. It includes voltage cutoff settings for NiCd, NiMH, and 2 and 3 cell LiPo and LiFe packs. I'm running it with a cheapo 1500 mAh NiCd pack becasue that's all I have right now, and still getting 10-12 minutes on a pack. You can tell right away when the voltage cutoff kicks in, because the ESC applies full brake. If the car screeches to a halt when you hit the throttle, your battery is done.

The cooling fan on the ESC is a little noisy, but it is effective. The ESC stayed nice and cool during back-to-back runs (25 minutes run time total), and the motor was just warm, but not hot. The batteries, however, were too hot to hold comfortably; you can get away with cheap NiCds, but it puts quite a strain on them. I need to get a better battery pack or two, at least 3000 mAh NiMH. Also, don't try to run with an adapter from the ESC's Deans-style plug to a Tamiya plug; the Tamiya plugs can't handle the juice and you'll trigger the voltage cutoff early. Use a pack with a Deans plug on it.

Right now, I have the system installed in my Lunchbox. I tried a Stadium Thunder, but the old worn-out diff gears weren't up to the task and the splines stripped out. It's overkill for the Lunchbox, but at least I know the gearbox can handle the power. When I have some more money, I want to find a used RC10 or something that can really handle high speeds and try it in that.Leopard Brushless Motor
http://www.hobbyhot.com/LEOPARD/

Fly Sky FS-TH9X 9 Channel Transmitter

The Fly Sky FS-TH9X is an excellent radio for the price. If you are on a limited budget and looking to upgrade to 2.4 GHz then I highly recommend you take a look at it. At under $100 for a complete combo it doesn't really matter if you knock or drop it.

• The FLYSKY 2.4 GHz price wars are really heating up at the moment now that many Chinese manufacturers have entered the market. For the past few years there have been various 2.4 GHz modules coming out of China, with some decent offering from Corona and Assan, now it seems like the Chinese want to make a name for themselves by offering full systems. The Fly Sky FS-TH9X is the first offering that I decided to check out.

• I am a diehard Futaba Fasst fan but I am tired of having to sell a kidney or take out a second mortgage every time I have to buy a new receiver for my fleet. The Fly Sky offerings drew my attention with their sub $20 receivers. The Fly Sky FS-TH9X is offered under various brand names but it is basically the same transmitter.

• The Fly Sky FS-TH9X is modular system, so specifications may vary depending on the module you select. The transmitter itself is loaded with features, some of which you will usually only find on some high end transmitters.

Specifications

• Number of Channels: 8ch PPM/9ch PCM
• Display: 128*64 LCD
• Support Type: Heli/Acro/Glid
• User Models: 8
• Stick Modes: 4
• Encoder Type: PPM/PCM
• Sub Trim: Yes
• Simulator Interface: Yes
• Buzzer: Yes
• Low Voltage Display: Yes

The menus are clearly and easy to navigate using the 128×64 pixel LCD display. The only issue I had was that the +/- buttons are back to front with the positive on the left.

Available at http://www.hobbyhot.com

source: http://helicopter.dozuki.com/c/Fly_Sky_FS-TH9X_9_Channel_Transmitter

Syma S107G 3Ch coaxial micro heli with gyro Review

Syma S107G 3Ch coaxial micro heli with gyro Review

I initially purchased one as a gift from hobbyhot. I test flew it and then wrapped it up as a gift. All went well. I wanted an additional tough 3Ch coaxial for my kids to fly so I purchased another Syma S107G from hobbyhot (inexpensive or free shipping). The helicopter is a little heavier than the Phoenix 6010 that I previously purchased but just as tough. In comparison, the Syma is heavier and a bit slower in forward flight. The Syma however handles the air from the airconditioner vent better. The Syma also has a more proportional tail control. So forward flying and turning is easer & more precise on the Syma. There is no shortage of places to get spare parts from and I had ordered a set of spare blades and rear prop from hobbyhot on a later spare parts order I made for my other helicopters. The S107G is a very popular 3Ch indoor heli currently and you will find no shortage of fans of this heli out there. Neither my kids nor I have yet to perminanty damage the helicopter (see TIPS below). But don't consider them indestructable. But for the price, they are a great addition to ANY experianced flyer to have to take a quick flight indoors, even in a small room. My S107G was a Revision 5 circuit board.

Here are som TIPS on the S107G

• Charge using the USB cable. Light will be ON when unplugged or fully charged. It may be dimmly lit when charging. Note that the USB plug you plug it into needs to supply sufficient power or it will not work. Some PC USB hubs are NOT powered and you may need to plug directly into PC. I do however you find a USB plug in power supply to charge this helicopter. Charging takes 20-30 minutes depending on discharge of LiPo.
• DO NOT keep flying once you loose the power to stay in a hover. You will wear down the LiPo faster this way. You may also elect to time your flight so you fly 30-60 seconds LESS than this point. That will prolong the LiPo life.
• To reduce damage, you MUST lower your throttle upon or just before IMPACT with an object. This will help save the blades and motor gears. The helicopter can take a fall from 6' onto carpet better than it can grind it's blades into a wall or bedpost.
• The closer you are to an object, the more that object pushes or pulls the helicopter because of the airflow across the blades. So landing on a 2 foot tall stack of books is harder than landing on a magazine on the floor.
• If you are not going to fly the helicopter (for say a week), fully charge the helicopter, then fly for 3 minutes and then store the helicopter (powered off of course).

Power Up sequence

1. Set Tx to channel A
2. Lower throttle. Turn on Tx
3. Turn on Helicopter and set down.
4. There is an LED that will stop flashing under the canopy on the back left of the circuit board when it's initialized. This takes 5-10 seconds.
5. Slowly raise throttle.

Fly Sky FS-GT3B 2.4Ghz radio reviewed

i just brought this FLYSKY FS-GT3B from hobbyhot.com

http://www.hobbyhot.com/Fly-Sky-FS-GT3B-3ch-2.4GHz-LCD-Transmitter-Receiver.html

just USd 34.5

Transmitter Specifications
Dimension: 154 x 127 x 270mm
Net Weight: 395g
ANT Length: 26mm (2.4GHz)
Channels: 3ch
Frequency: 2.4GHz
Modulation: GFSK
System Type: AFHDS
Sensitivity: 1024
LCD Dimension: 100mm (L:95 x W:3mm) / 4 inches (L:3`12 x W:1`3 inches)
RF Power: no more than 10mW
Low Voltage Warning: Yes (less than 9.5V)
DSC port: Yes (3.5mm)
Charger Port: Yes
Power: 12V DC (1.5V x 8)
Model Type: RC Car / Boat
Certificate: CE (0678) FCC

Receiver Specifications
Dimension: 37.6 x 22.3 x 13mm
Net Weight: 5g
ANT Length: 26mm
Channels 3ch
Frequency: 2.4GHz
Modulation: GFSK
System Type: AFHDS
Sensitivity: 1024
RF Receiver Sensitivity: -105dbm
Power: 4.5 - 6V DC (1.5V x 4)
Model Type: RC Car / Boat
Certificate: CE (0678) FCC

Fly Sky FS-GT3B 3ch 2.4GHz LCD Transmitter

Fly Sky FS-GT3B 3ch 2.4GHz LCD Transmitter + Receiver available at Hobbyhot.com

Introduction AFHDS (automatic frequency hopping digital system), is developed by FLYSKY for all the Radio Control model lovers and is patented by FLYSKY at home. The system is specially developed for all the Radio control models, that offers super active and passive anti-jamming capabilities, very low power consumption and high receiver sensitivity. With extreme rigorous testing by engineers and studying the markets for years, FLYSKY AFHDS is now considered to be the one of the best systems available in the market. Transmitter Specifications Dimension: 154 x 127 x 270mm Net Weight: 395g ANT Length: 26mm (2.4GHz) Channels: 3ch Frequency: 2.4GHz Modulation: GFSK System Type: AFHDS Sensitivity: 1024 LCD Dimension: 100mm (L:95 x W:3mm) / 4 inches (L:3`12 x W:1`3 inches) RF Power: no more than 10mW Low Voltage Warning: Yes (less than 9.5V) DSC port: Yes (3.5mm) Charger Port: Yes Power: 12V DC (1.5V x 8) Model Type: RC Car / Boat Certificate: CE (0678) FCC Receiver Specifications Dimension: 37.6 x 22.3 x 13mm Net Weight: 5g ANT Length: 26mm Channels 3ch Frequency: 2.4GHz Modulation: GFSK System Type: AFHDS Sensitivity: 1024 RF Receiver Sensitivity: -105dbm Power: 4.5 - 6V DC (1.5V x 4) Model Type: RC Car / Boat Certificate: CE (0678) FCC * All of the above information and pictures are reference only. Color may be changed.

RC Air Clown Fish Remote Control Flying Fish Airship Toy (Complete Set)

New Arrival! RC Air Clown Fish Remote Control Flying Fish Airship Toy (Complete Set)


RC Air Clown Fish Remote Control Flying Fish Airship Toy (Complete Set)
Available at www.hobbyhot.com - ship to worldwide
Available at www.hobbyhot.com - ship to worldwide

Introduction
Air Clown Fish swim through the air with incredibly smooth and life-like motion. These amazing fish provide hours of remote control indoor fun in even the smallest of rooms (not for outdoor use). They require only for AAA batteries (one in the body, three in the controller) and have complete up, down and 360 degree turning control.

Simply fill your Air Shark with helium inexpensively at any part store, florist shop, or grocery store that carries balloons. The body is made from a high quality, durable nylon material that will stay inflated for weeks! You can fill it again and again.
Remote control has never come to lift so magically!

Specifications
Controller: Infra-red
Remote Functions: climb,descend and tail fin control
Range: up to 40 feet
Length(with tail): 57 inches
Height(with fins): 36 inches
Battery: 4 x 1.5V AAA batteries (not included)
Require Gas: Helium (not included)

Features
Moves like a real fish
Steers in any direction
Easy indoor fun
Full Function: Up, Down, Forward, Left Turn, Right Turn
Control Range: about 8m

New Arrival! Prolux RC Model Fast Fueller Hand Fuel Pump


Prolux RC Model Fast Fueller Hand Fuel Pump
Available at www.hobbyhot.com - ship to worldwide
Available at www.hobbyhot.com - ship to worldwide

Specifications
Dimensions (approximately): 105mm x 52.5mm x 60mm

Features
- New generation fuel pump with compact size
- Double injection, using TPR material that has a comfortable feel
- Improved gear mesh and make the large flow rate 18cc/sec
- Advanced pump unit design, glow fuels and gasoline are both compatible
- Includes filter fuel nozzle and 19" silicon fuel tubing

New Arrival! Prolux RC Model Fast Hand Held Fuel Pump


Prolux RC Model Fast Hand Held Fuel Pump
Available at www.hobbyhot.com - ship to worldwide
Available at www.hobbyhot.com - ship to worldwide

Specifications 
Dimensions (approximately): 105mm x 52.5mm x 60mm 

Features
- The latest easy-to-use design that fits comfortably in your hand.
- Molded fuel-proof Nylon case and injection filled with fiberglass.
- Improved gear mesh mechanism makes hand-cranking easier.
- Advanced pump unit design allows fast filling without leakage.
- Nitro fuels and gasoline are both compatible. ( Net Weight )
- Includes filter, fuel nozzle, self-tapping screws and 19`` of silicone fuel tubing. 

New Arrival! Wish V2 RC Model Hand Crank Fuel Pump


Wish V2 RC Model Hand Crank Fuel Pump
Available at www.hobbyhot.com - ship to worldwide
Available at www.hobbyhot.com - ship to worldwide
Specifications

• Dimensions (approximately): 105mm x 52.5mm x 60mm

Features

• The latest easy-to-use design that fits comfortably in your hand.
  
• Molded fuel-proof Nylon case and injection filled with fiberglass.
  
• Improved gear mesh mechanism makes hand-cranking easier.
  
• Advanced pump unit design allows fast filling without leakage.
  
• Nitro fuels and gasoline are both compatible. ( Net Weight )
  
• Includes filter, fuel nozzle, self-tapping screws and 19` of silicone fuel tubing.

Package Included

• 1 x Wish V2 RC Model Hand Crank Fuel Pump

New Arrival! LEOPARD RC Model 2850 KV2950 4 Poles R/C Hobby Inrunner Brushless Motor


LEOPARD RC Model 2850 KV2950 4 Poles R/C Hobby Inrunner Brushless Motor
Available at www.hobbyhot.com - ship to worldwide
Available at www.hobbyhot.com - ship to worldwide

escr>Specifications
Max. Current: 48A
Lipo Cell: 2 - 5s
Max. Power: 1000W
Rotational Speed: 2950KV
Mounting Hole Depth: 5mm
Shaft Diameter: 4mm
Shaft Length: 12mm
Dimensions (Diameter x Length): 28mm x 50mm
Weight: 145g
Suitable Model: RC Car / Boat

Features
- High Efficiency
- Handwound
- Neodym Magnets
- Long Service Life
- Low Electromagnetic Interference
- 12 Slot Stator
- Precision Ball Bearings For Smooth Operation
- Minimal Motor Maintenance Required
- Low Current

New Arrival! LEOPARD RC Model 2845 KV4420 4 Poles R/C Hobby Inrunner Brushless Motor


LEOPARD RC Model 2845 KV4420 4 Poles R/C Hobby Inrunner Brushless Motor
Available at www.hobbyhot.com - ship to worldwide
Available at www.hobbyhot.com - ship to worldwide

escr>Specifications
Max. Current: 30A
Lipo Cell: 2 - 3s
Max. Power: 390W
Rotational Speed: 4420KV
Mounting Hole Depth: 5mm
Shaft Diameter: 3.175mm
Shaft Length: 12mm
Dimensions (Diameter x Length): 28mm x 45mm
Weight: 115g
Suitable Model: RC Car / Boat

Features
- High Efficiency
- Handwound
- Neodym Magnets
- Long Service Life
- Low Electromagnetic Interference
- 12 Slot Stator
- Precision Ball Bearings For Smooth Operation
- Minimal Motor Maintenance Required
- Low Current

New Arrival! LEOPARD RC Model 2845 KV2960 4 Poles R/C Hobby Inrunner Brushless Motor


LEOPARD RC Model 2845 KV2960 4 Poles R/C Hobby Inrunner Brushless Motor
Available at www.hobbyhot.com - ship to worldwide
Available at www.hobbyhot.com - ship to worldwide

escr>

escr>Specifications
Max. Current: 30A
Lipo Cell: 2 - 4s
Max. Power: 390W
Rotational Speed: 2960KV
Mounting Hole Depth: 5mm
Shaft Diameter: 3.175mm
Shaft Length: 12mm
Dimensions (Diameter x Length): 28mm x 45mm
Weight: 115g
Suitable Model: RC Car / Boat

Features
- High Efficiency
- Handwound
- Neodym Magnets
- Long Service Life
- Low Electromagnetic Interference
- 12 Slot Stator
- Precision Ball Bearings For Smooth Operation
- Minimal Motor Maintenance Required
- Low Current

New Arrival! RC Plane Model 3000KV Brushless Motor 70mm Golden Ducted Fan


RC Plane Model 3000KV Brushless Motor 70mm Golden Ducted Fan
Available at www.hobbyhot.com - ship to worldwide
Available at www.hobbyhot.com - ship to worldwide
Specifications
Rotational Speed: 3000 RPM/V
Continuous Current: 22A
Max. Current: 30A
Input Voltage: 8 - 16V
No Load Current: 1.8A
Internal Resistance: 129m ohm
Motor-70mm-Golden-Ducted-Fan.html>Ducted Fan Exterior Dimensions (Diameter x Length): 73mm x 58mm
Motor-70mm-Golden-Ducted-Fan.html>Ducted Fan Interior Dimensions (Diameter x Length): 70mm x 58mm
Input Motor-70mm-Golden-Ducted-Fan.html>Battery Types: NiCd/ Nimh/ Li-po Motor-70mm-Golden-Ducted-Fan.html>Battery Motor-70mm-Golden-Ducted-Fan.html>battery li-po nimh nicd types:>

New Arrival! RC Plane Model 3300 KV Airplane Outrunner Brushless Motor Ducted Fan


RC Plane Model 3300 KV Airplane Outrunner Brushless Motor Ducted Fan
Available at www.hobbyhot.com - ship to worldwide
Available at www.hobbyhot.com - ship to worldwide
Specifications

• Rotational Speed: 3300 RPM/V
  
• Continuous Current: 22A
  
• Max. Current: 30A
  
• Input Voltage: 8 - 18V
  
• No Load Current: 1.8A
  
• Internal Resistance: 128m ohm
  
• Motor Dimensions (Diameter x Length): 27.7mm x 41mm Motor-Ducted-Fan.html>MOTOR x length): (diameter dimensions 41mm 27.7mm>
  
• Shaft Dimensions (Diameter x Length): 3.96mm x 13.5mm
  
• Motor-Ducted-Fan.html>Ducted Fan Exterior Dimensions (Diameter x Length): 73mm x 58mm
  
• Motor-Ducted-Fan.html>Ducted Fan Interior Dimensions (Diameter x Length): 70mm x 58mm
  
• Input Motor-Ducted-Fan.html>Battery Types: NiCd/ Nimh/ Li-po Motor-Ducted-Fan.html>Battery Motor-Ducted-Fan.html>battery li-po nimh nicd types:>

Package Included

• 1 x RC 3300 RPM/V Outrunner Brushless Motor 70mm Motor-Ducted-Fan.html>Ducted Fan

New Arrival! RC Plane Model 4200KV Brushless Motor 55mm Air Ducted Fan


RC Plane Model 4200KV Brushless Motor 55mm Air Ducted Fan
Available at www.hobbyhot.com - ship to worldwide
Available at www.hobbyhot.com - ship to worldwide

escr>Specifications
Rotational Speed: 4200 RPM/V
Continuous Current: 18A
Max. Current: 25A
Input Voltage: 8 - 16V
No Load Current: 1.2A
Internal Resistance: 102m ohm
Motor-55mm-Air-Ducted-Fan.html>Ducted Fan Exterior Dimensions (Diameter x Length): 59mm x 42mm
Motor-55mm-Air-Ducted-Fan.html>Ducted Fan Interior Dimensions (Diameter x Length): 56.5mm x 42mm
Input Motor-55mm-Air-Ducted-Fan.html>Battery Types: NiCd/ Nimh/ Li-po Motor-55mm-Air-Ducted-Fan.html>Battery Motor-55mm-Air-Ducted-Fan.html>battery li-po nimh nicd types:>

New Arrival! RC Air Shark Remote Control Flying Fish Airship Toy (Complete Set) AS200


RC Air Shark Remote Control Flying Fish Airship Toy (Complete Set) AS200
Available at www.hobbyhot.com - ship to worldwide
Available at www.hobbyhot.com - ship to worldwide

Introduction
Air Shark swim through the air with incredibly smooth and life-like motion. These amazing fish provide hours of remote control indoor fun in even the smallest of rooms (not for outdoor use). They require only for AAA batteries (one in the body, three in the controller) and have complete up, down and 360 degree turning control.

Simply fill your Air Shark with helium inexpensively at any part store, florist shop, or grocery store that carries balloons. The body is made from a high quality, durable nylon material that will stay inflated for weeks! You can fill it again and again.
Remote control has never come to lift so magically!

Specifications
Controller: Infra-red
Remote Functions: climb,descend and tail fin control
Range: up to 40 feet
Length(with tail): 57 inches
Height(with fins): 36 inches
Battery: 4 x 1.5V AAA batteries (not included)
Require Gas: Helium (not included)

Features
Moves like a real fish
Steers in any direction
Easy indoor fun
Full Function: Up, Down, Forward, Left Turn, Right Turn
Control Range: about 8m

New Arrival! HobbyHot RC Model Remove Ball Link Pincer Tool Plier


HobbyHot RC Model Remove Ball Link Pincer Tool Plier
Available at www.hobbyhot.com - ship to worldwide
Available at www.hobbyhot.com - ship to worldwide

Specifications

• Dimensions: 132mm x 62mm x 16mm
  
  
• Material: Steel and Plastic
  

Package Included

• 1 x RC Model Remove Ball Link Pincer Tool (Black)

Remote Controlled Toys Online Shop: www.hobbyhot.com
We highly recommend the follow RC TOYS model, We accept Wholesale order worldwide, We also sell onEBAY.COMaccept PAYPAL and Credit Card
SKYWALKER 20A RC Brushless Speed Controller ESC USD12.10 only
HOBBYMATE RC Model HB730 Dual Rate and Head Lock Gyro USD23.90 only
CX450-01-09 Main Shaft USD4.70 only
LEOPARD Model 5682 KV1360 4 Poles Brushless Motor USD135.90 only
Corona RP8D1 8ch 35MHz Dual Conversion Receiver for Futaba JR SANWA USD18.90 only
Walkera HM-38-Z-26 Brushless Speed Controler USD13.00 only
RC-Tools S80 Toolbox (Helicopter) USD22.50 only
LEOPARD Model 4074 KV2000 4 Poles Brushless Motor USD74.90 only
Walkera HM-59DQ-Z-10 Main Rotor Shaft USD3.50 only
HobbyHot Aluminum 84mm Oil Shock Damper (2pcs) USD7.30 only
Walkera HM-4#3-Z-01 Main Rotor Blade USD2.60 only
Swanghobby Aluminium 95mm Diameter Spinner USD39.30 only
SWANGHOBBY 2.3mm Shaft Diameter Propeller Adaptor USD1.90 only
LEOPARD Model 2835 KV1880 RC Outrunner Brushless Motor & Propeller Adaptor USD29.90 only
RCS 2700mAh 11.1V 30C LiPo Lithium Polymer Battery USD33.90 only
HB-22 LED Tire Light USD9.49 only
Silver Safe Bag 300 x 220mm LiPo Safety Fireproof USD8.90 only
Futaba S9255 Digital Servo USD96.20 only
SWANGHOBBY Voltage and Current Checker USD5.90 only
Spyapple M-100 GSM SIM Card SPY Listener USD38.10 only