Brushless Motor + 60A-SD ESC + LED Card.
Very good and VERY fast combo. Programming is very easy.
you can buy this HOBBYWING eZRun 8.5T/3650 4000Kv Sensorless
Brushless Motor + 60A-SD ESC + LED Card at Remote Control Model Free Shipping Shop
"eZRun" series brushless system is budget-friendly, it is special designed for 1/10 and 1/12 scale EP ON-ROAD car, and it is most suitable for the following applications:
1) R/C enthusiasts to upgrade to brushless and experience incredible power and starting torque, minimal maintenace and longer runtimes;
2) "RTR" (Ready To Run) applications for manufacturers;
3) Club race for stock equipments (Same controllers and/or same motors) ;
The Combo includes the following items:
60A-SL brushless ESC: 1pcs
8.5T sensorless brushless motor: 1pcs
Program card for car ESC: 1pcs
Cooling fan: 1pcs
Specification of The ESC
Output: Continuous current 60A, burst current 380A.
Input: 4-9 cells NiMh/NiCd or 2-3 cells LiPo. Note1
BEC Output: 6V/1.5A.
Resistance: 0.00075 Ohm.
Motor Supported: Sensorless Brushless Motor
Suitable Brushless Motor: 5.5T and > 5.5T
Suitable Car: 1/10 on-road or off-road cars / trucks for normal race or sportful race.
Size: 31.5mm(L) * 27.5mm(W) * 24mm(H).
Weight: 32g(Without wires)
For 4-6 Cell Ni-xx or 2 cell lithium battery: You need not change the fan coming with the ESC;
For 7-9 Cell Ni-xx or 3 cell lithium battery: You must change the fan because it cannot work with such a high voltage, so please choose a high voltage fan or supply the fan from the receiver (+6V)
Note2: The values of "T" number is tested under the following conditions:
a) The input is a 6 cells Ni-xx battery;
b) The ESC is equipped with a cooling fan.
Compatible with all sonsorless brushless motor.
Use top quality electronic components to enhance the current endurance ability of the ESC.
Excellent start-up, acceleration and linearity features.
With 2 running modes (Racing mode and Forward/Backward mode).
With 4 steps of maximum reverse force adjustment.
Proportional ABS brake function with 4 steps of maximum brake force adjustment, 8 steps of drag-brake force adjustment and 4 steps of initial brake force adjustment.
With 4 start modes (Also called "Punch" ) from "Soft" to "Very aggressive".
Multiple protection features: Low voltage cut-off protection for lithium or nickel battery / Over-heat protection / Throttle signal loss protection / Motor blocked protection.
With 8 steps of timing adjustment to get the best compatibility with various of motors.
Easily program with only one button and compatible with pocket-sized program card.
Motor uses top quality materials:
Aluminium shell (case)
High quality magnets
Copper wires of high temperature endurance
Good quality bearings.
Dustproof design for the motor.