I bought this charger for my RC18T FT and Rhino 1750mah 2S 25C. I received it VERY fast considering it came from HongKong and shipping was FREE. I open the package to find the box in prefect condition and hooked everything up. I first charged my Rhino 1750 2S which was perfectly balanced. (Thanks HobbyCity) Then I charged my GP 3300mah 6S Ni-Mh battery and it charged up and had more power then ever. I highly recommend this charger to anyone looking for a budget charger to get into the world of Li-Po.
you can buy this iMAX B5 Balancing Charger at Remote Control Model Free Shipping Shop
SpecificationB5 has an individual-cell-voltage balancer inside.
So it does not need any balancer separately
charging Lipo battery for cell balancing.
Maximum safety:
Delta-peak sensitivity:The automatic charge
termination program works on the principle of
the Delta-peak voltage detection.
Capacity limit:The charging capacity always
calculated by multiple of the charging current
and time.If the charging capacity exceeds the
limit the process will be terminated automatically
when you set the maximum value.
Processing time limit:you can also restrain the
maximum process time to prevent from any
possible defect.
Input power monitor:To protect the car battery
using as input power from being damaged the
voltage of it always monitored. Lf it drops below
the lower limit the process will be ended
automatically.
High-power and high-performance circuit
B5 employs the circuit that has maximum output
power of 50w. As a result it can charge up to 14
cells of Nicd/NiMH and 5 series of Li-poly
batteries with maximum current of 5.0A
Specification - Operating Voltage Range: 10.0-18.0 Volt
- Circuit Power: Max.50W
- Charge Current Range; 0.1-5.0A
- Current Drain For Balancing Li-Po; 200MAH/cell
- NiCd/NiMH Battery cell count: 1-14cell
- Li-ion/Polymer cell count: 15series
- Pb Battery Voltage: 6v,12v
- Weight: 280g
- Dimensions: 130 x 80 x 23mm
No comments:
Post a Comment